Includes automatic filling with leakage and pressure monitoring, maximum temperature monitoring, and a sensor break monitor.
The "Plus D" designation highlights the premium, intuitive touch-screen controller that displays flow, pressure, and temperature simultaneously. 2. Installation and Pre-Operational Setup
Officially, the Tempro plus D 285/320/360 models are high-performance, pressurized system units, equipped with suitable for graduated temperature ranges. Where smaller models like the D100 or D120-L target general-purpose applications, the D 360 is built for sustained, high-capacity performance. Its core mission is to maintain a stable, precisely controlled mold temperature to ensure consistent part quality, reduce cycle times, and prevent defects.
A Solid-State Relay (SSR) has shorted out, causing a heater element to stay energized constantly. wittmann tempro plus d 360 manual exclusive
Stainless steel plate heat exchangers deliver rapid cooling responses without scaling risks in the primary loop.
Check the condition of the internal heat exchanger. If scaling has formed due to poor water quality, chemical descaling must be performed using Wittmann-approved agents.
When you power on the unit, the main screen displays the actual temperature (process value) and the set temperature (setpoint value) simultaneously. Visual indicators display current pump pressure, flow rate, and heating/cooling percentages. Adjusting the Temperature Setpoint Press the field on the touch display. A Solid-State Relay (SSR) has shorted out, causing
When an error occurs, the Tempro Plus D 360 safety circuit trips to prevent damage to both the unit and the injection mold. Below are the most common faults and their immediate remedies. Fault: Low Flow / Flow Alarm
Integration for Industry 4.0 connectivity, allowing the TCU to communicate directly with injection molding machines. Temperature Controllers - WITTMANN Group
: The exclusive manual details the correct startup sequence to prevent thermal shock and system cavitation. This includes opening the water supply, checking the fill level, powering on the main switch, and then using the touch-screen interface to set the pump speed and temperature setpoint. It emphasizes the importance of the automatic filling and constant pressure monitoring systems. This article provides an
The stands as a premium, high-temperature water mold temperature control unit (TCU). Engineered for demanding industrial environments, this unit delivers pressurized water control up to 160°C (320°F) or more, depending on specific engineering configurations.
This article provides an , in-depth look at the capabilities, operational procedures, and technical specifications outlined in the Tempro Plus D 360 manual. 1. Introduction to the Wittmann Tempro Plus D 360
An energy-saving profile that throttles pump and heater activity when the mold reaches thermal equilibrium, cutting facility utility expenses. 4. Maintenance Schedule: Maximizing Unit Longevity
Advanced proportional valve controls regulate the cooling water intake based on real-time microprocessor data.