Switch between "Direct Mode" (USB) and "Infrastructure Mode" (Wi-Fi).
To set up a wireless signal for the VOCOM 1, follow these steps within the software: Direct Connection: Connect the VOCOM 1 to the laptop using a Access Settings: Open the PTT software, navigate to the , and select Configure Unit: Communication unit configuration and click on Configuration Select Mode: USB+Directly to Communication unit Restore default values Disconnect the USB cable. In Settings, go to Comm. unit Selection
This section is reserved for network configurations, such as assigning static IP addresses to the Vocom adapter or setting up specific subnets if your shop operates on a strict corporate network. 4. How to Update Vocom 1 Firmware
Once open, you will see a relatively stark utility with tabs: vocom 1 configurator
Plug the Vocom 1 into your PC via the provided USB cable.
VOCOM 1 (88890300) configurator is a critical software utility within the Premium Tech Tool (PTT)
Connect the Vocom 1 to your PC using the heavy-duty industrial USB cable. Windows will recognize the device and assign the virtual communication ports. 3. Navigating the Configurator Interface Switch between "Direct Mode" (USB) and "Infrastructure Mode"
The Vocom 1 Configurator is the essential software utility used to set up, update, and manage the Volvo Vocom I (88890300) diagnostic adapter. This hardware interface connects your computer to Volvo, Renault, Mack, and UD trucks, as well as Volvo Construction Equipment and Marine engines. Without proper configuration, your diagnostic software cannot communicate with the vehicle's electronic control units (ECUs).
The configurator is rarely installed as a standalone app; it is part of the larger Vocom driver package. 1. Install the Drivers Disconnect the Vocom 1 device from your PC.
Fully compatible with Volvo Premium Tech Tool 1.12, 2.7, and 2.8 versions. unit Selection This section is reserved for network
Before using the VOCOM 1 Configurator, you must install the correct drivers and the Premium Tech Tool (PTT) software on your PC. Follow this guide for a successful setup:
: In contrast, the VOCOM 2 Configurator is a standalone Windows application launched from Start > All Programs > VOCOM II folder . The VOCOM 2 Configurator main window has a device list on the left, a menu bar at the top, and the info bar at the bottom showing the software version and connection mode of the selected device.