Set these in AVRDUDESS and click "Write." If you set the SPIEN fuse to 0, you forever.
The reflashing process depends entirely on the state of your interface's bootloader.
Necessary for connecting the programmer wires to the board. 3. Software Suite vcds atmega162 reflash
Before diving into the process, it is critical to understand the two main components inside your HEX-USB+CAN cable that require reprogramming:
0xFD (or 0xFF depending on boot size preferences) Lock Bits: 0x3F (unlocked for writing) Execute the fuse command: Set these in AVRDUDESS and click "Write
Does your PCB have , or will you need to solder to the chip pins?
The cable case is opened to expose the PCB. If an ISP header is present, it is connected to the programmer. If an ISP header is present, it is
When reflashing the ATMega162 microcontroller, please exercise caution:
Troubleshooting