Installation Manual Exclusive !full! - Ts1162

Slide the TS1162 drive canister into the dedicated library slot guide rails. Push smoothly until the drive docks firmly into the library’s backplane.

To maintain optimal performance, the TS1162 should be inspected periodically.

For advanced configuration adjustments, including door shunts, zone mapping, or relay strike times, refer to the global Aritech Challenger Programming Manual . ts1162 installation manual exclusive

12 Gb/s Serial Attached SCSI (SAS) configuration (model-dependent). 2. Unboxing and Structural Inspection

Unlike legacy Tecom keypads that rely on physical DIP switches, the TS1162 features intelligent digital addressing configured directly through its interface. Slide the TS1162 drive canister into the dedicated

Open a web browser on a machine within the same subnet and enter the factory default IP address ( 192.168.1.100 ).

Use the onboard buttons to set your target relative humidity (RH). A common starting point is 50% . For advanced configuration adjustments

Connect your wrist strap to an unpainted grounded metal surface on your server rack before opening the static-shielding bag.

Clean the mounting port with a lint-free wipe and isopropyl alcohol. The manual states: "Even a single grain of sand can cause a 0.5% full-scale error." Apply a thin layer of thread sealant (Loctite 567, specifically) to the male threads of the TS1162. Do not use PTFE tape; it lubricates too much and will throw off your torque reading.