Because a bricked motherboard cannot read a USB thumb drive via the boot menu, you must write the file directly onto the SPI flash memory chip using dedicated hardware.
The system lost power in the middle of an official HP firmware update. nutmeg-mini-itx rev 1.0 bios bin file
Open the chassis and look for an 8-pin Serial Peripheral Interface (SPI) flash chip labeled with identifiers like Winbond (e.g., W25Q64), Macronix, or Gigadevice. It is usually positioned close to the CMOS battery or the Intel SoC. 3. Attach the SOP8 Chip Clip Because a bricked motherboard cannot read a USB
If the motherboard is completely bricked and you cannot use the official recovery tools, you may need a "full dump" from a working board: Updating the BIOS (Basic Input Output System) (Windows) It is usually positioned close to the CMOS
Intel 4th Generation Core i3 / i5 / i7, Pentium, and Celeron processors (LGA 1150 socket).
: