: Alternating blinking lights on the ink and paper icons usually indicate a temporary firmware jam or an ink pad capacity warning.
What (Windows or Mac) is your computer running?
Unplug the USB cable if it is connected to a PC. how to reset epson l3252 printer
: While holding those two buttons down, press the Power button.
If you are searching for , you are likely staring at this frustrating error. The good news: a reset is possible, and you do not always need to visit a service center. This detailed guide will walk you through everything from understanding the error to performing the reset safely and effectively. : Alternating blinking lights on the ink and
Note: The waste ink pad physically fills up over time. Resetting the software clears the error, but you should physically clean or replace the waste pad eventually to avoid messy ink overflows. Troubleshooting Tips After a Reset
Wait for the power light to stay solid, indicating the reset is complete. 2. Reset Waste Ink Pad Counter : While holding those two buttons down, press
To bring the L3252 back to life, Elias followed the path of the "WIC" (Waste Ink Counter) reset: