Foxconn N15235 Motherboard Front Panel Connectors

| Pin Number | Signal Name | Typical Wire Color | Function | |------------|--------------------|--------------------|------------------------------------| | 1 | HDD_LED (+) | Red or Orange | Hard Drive Activity Light (Positive) | | 2 | HDD_LED (-) | White or Black | Hard Drive Light (Ground/Negative) | | 3 | POWER_SW (+) | Red or Yellow | Power Button (Positive) | | 4 | POWER_SW (-) | Black or White | Power Button (Ground) | | 5 | Reserved / N/C | None | Do not connect anything here. | | 6 | POWER_LED (+) | Green or Blue | Power Indicator Light (Positive) | | 7 | RESET_SW (+) | Blue or Orange | Reset Button (Positive) | | 8 | RESET_SW (-) | White or Black | Reset Button (Ground) | | 9 | POWER_LED (-) | White or Black | Power Indicator Light (Neg/Ground) | | NC (hole) | Key (missing pin) | N/A | Prevents wrong orientation. |

The standard 9-pin layout on Foxconn motherboards uses the following configuration. The rows are split into an (usually top or left) and an Even-numbered row (usually bottom or right).

This is the most finicky connection on the Foxconn N15235. Modern cases use a 2-pin POWER LED connector. Insert it so that (bottom row, first pin from left) and negative (-) goes to Pin 4 (bottom row, second pin from left). If your case has a 3-pin Power LED with a blank middle, plug it so the blank sits over Pin 3 (top row, second pin). foxconn n15235 motherboard front panel connectors

(Row A) (Row B) Top +-----+ +-----+ Row 2 4 6 8 10 | | | | | | | | | (No pin) 1 3 5 7 9 Bottom +-----+ +-----+ Row

Connect these to the two pins next to the Power LED. Polarity (positive/negative) usually does not matter for switches. HDD LED (HDLED): Connect these to the bottom-left pins. Reset Switch (RESET): Connect these to the bottom pins next to the HDD LED. Alignment Tip: | Pin Number | Signal Name | Typical

The front panel header on this motherboard is typically labeled . You can find it on the bottom-right edge of the motherboard. It is a 9-pin block of male pins (arranged as 2x5 with one pin missing). 2. Pinout Configuration for FP1

Help you identify the wire labels, if you can . The rows are split into an (usually top

: Connect to the pins horizontally next to the Power LED.

The pins are generally arranged in two rows. Match the labels on your case's small plastic connectors to these pins: Pins 1-2 (Left) Pins 3-4 (Middle) Pins 5+ (Right) PLED+ / PLED- (Power LED) (Power Switch) (Reserved/Empty) Bottom Row HD_LED+ / HD_LED- (Reset Switch) (Empty/NC) Connection Steps Power LED (PLED):

Ensure the Power SW connector is securely sitting on Pins 6 and 8.

Inside your computer case, you will find small, labeled connectors from the front panel. They are: