What or error message is showing on your device? Do you know your device's specific hardware board revision ? Share public link
If you are moving to a major version like 1.3.0C, you may need to update the FPGA separately to resolve auto-set issues. Step-by-Step Firmware Install Procedure
If the SD card method fails and your scope is stuck on a black screen or boot loop, you may need DFU mode: dso2512g firmware install
: Allows you to save waveform data in CSV format for analysis in Excel or Python.
Extract the contents to a folder on your computer. You should see a .bin or .app file. Step 2: Put the DSO2512G into Bootloader Mode What or error message is showing on your device
The ZEEWEII DSO2512G Go to product viewer dialog for this item.
Once you have safely ejected the Udisk, unplug the USB cable from your oscilloscope entirely. Step-by-Step Firmware Install Procedure If the SD card
| Problem | Likely Fix | |--------|-------------| | No update screen (powers on normally) | Wrong button combo. Try holding + Power, or “M” + Power. | | “File not found” error | SD card not FAT32, or file not named exactly as expected (case-sensitive). | | Update freezes halfway | Battery died – recharge fully and retry. If recurring, card might be faulty. | | White screen stays forever | Wrong firmware file (hardware mismatch). Remove SD, power off, try a different file version. |
Connect the USB cable to your PC but to the oscilloscope. Hold down the power button on the DSO2512G. While holding the power button, plug in the USB cable.
Tim Schuerewegen's modded firmware greatly enhances the DSO2512G's functionality. The V1.3.0C mod version includes the following significant improvements:
Navigate back to to verify that the new version number matches.