Alps Electric Hidclass 10013 Updated [upd] Jun 2026

The "HIDClass" in the name refers to the class, a Microsoft standard for drivers that manage input peripherals like keyboards, mice, and, most importantly for this context, touchpads. The "10013" portion is a version number, specifically version 1.0.0.13 , dated April 6, 2017. It is classified as an optional driver update and is typically delivered through Windows Update.

| Symptom | Possible Cause | Solution | |---------|----------------|----------| | No read, LED not blinking | Power supply issue or poor grounding | Check 5V regulator; ensure GND is common with host | | Intermittent reads | Antenna mismatch or detuning | Re-tune antenna to 125 kHz; adjust coil inductance | | Wrong card number reported | Wiegand timing mismatch | Increase inter-bit timeout to 5ms; check for signal reflections | | Module reads but lags | Old firmware version | Verify you have REV B or later; flash updated firmware from Alps | | Reads only some HID cards | Frequency drift or unsupported format | Ensure cards are Prox (not iClass or Seos); test with 26-bit default | alps electric hidclass 10013 updated

Third-party driver download sites may contain outdated, incompatible, or potentially malicious software. If you must use third-party sources, verify the digital signatures and file hashes before installation. The "HIDClass" in the name refers to the

Go to and click Check for updates .

Understanding the Alps Electric HIDClass 10013 Update: A Complete Guide | Symptom | Possible Cause | Solution |

Fixing the "Alps Electric HIDClass 1.0.0.13 Updated" Error in Windows